The rear stabiliser bar drop links for the BMW X3 G01 are a common wear item. Worn links cause knocking noise over bumps and uneven cornering behaviour. This pair of OEM-spec reinforced steel links restores original suspension geometry.

1. 1
2. Raise vehicle
3. 2
4. Locate rear stabiliser bar link between bar and suspension arm
5. 3
6. Hold link body with 17mm spanner
7. 4
8. Remove top nut (18mm) – counter-hold lower ball joint
9. 5
10. Remove bottom nut
11. 6
12. Remove link
13. 7
14. Install new link
15. 8
16. Torque nuts to 65Nm with vehicle weight on suspension.